EKO100 Heating Mat

100 W/m2 Designed for WOOD Floor Bases

The mats are ready to install heating elements consisting of a thin heating cable securely attached to a glass fibre mesh. The system is designed for indoor use to provide a warm floor effect or primary heat source. It should be installed directly under the surface to be heated, in either flexible tile adhesive or a self levelling compound.

Specification

Type of Heating Cable:	Double-core of Dia. 3.4mm, conductor screen
Number of Cold Tails:	1
Power output:	100W/m²
Power supply:	230V~50/60Hz
Mat thickness:	3.5mm
Minimum installation temperature:	0ºC

Maximum operating temperature:	+80ºC
Power output of heating cable:	~9W/m
Insulation:	FEP/XLPE
Outer Sheath:	XLPE
Resistance tolerance:	±5%
Minimum radius of bending cable:	5 D

100 W/m2 Underfloor heating mat

Part Number	Area (m2)	Power (w)	Width (m)	Length (m)
EKO100/1.0	1	100	0.5	2
EKO100/1.5	1.5	150	0.5	3
EKO100/2.0	2	200	0.5	4
EKO100/3.0	3	300	0.5	6
EKO100/4.0	4	400	0.5	8
EKO100/5.0	5	500	0.5	10
EKO100/6.0	6	600	0.5	12
EKO100/8.0	8	800	0.5	16
EKO100/10.0	10	1000	0.5	20

Multiple mats can be used for
larger areas

For more information, please give us a call on 01394 593 109 or email us at [email protected]