EKO160 Heating Mat
160 W/m2, Designed for CONCRETE Floor Bases
EKO160 mats are ready to install heating elements consisting of a thin heating cable securely attached to a glass fibre mesh. The system is designed for indoor use to provide a warm floor effect or primary heat source. It should be installed directly under the surface to be heated, in either flexible tile adhesive or self levelling compound.
Type of Heating Cable
| Double-core of Dia. 3.4mm, conductor screen
|
Number of Cold Tails | 1
|
Power output: | 160W/m² |
Power supply | 230V~50/60Hz |
Mat thickness | 3.5mm |
Minimum installation temperature | 0ºC |
Maximum operating temperature | +80ºC |
Power output of heating cable | ~14W/m |
Insulation | FEP/XLPE |
Outer Sheath | XLPE
|
Resistance tolerance | ±5% |
Minimum radius of bending cable | 5 D |
160 W/m2 Underfloor heating mat
Part Number | Area (m2) | Power (w) | Width (m) | Length (m) |
EKO160/1.0 | 1 | 160 | 0.5 | 2 |
EKO160/1.5 | 1.5 | 240 | 0.5 | 3 |
EKO160/2.0 | 2 | 320 | 0.5 | 4 |
EKO160/2.5 | 2.5 | 400 | 0.5 | 5 |
EKO160/3.0 | 3 | 480 | 0.5 | 6
|
EKO160/3.5 | 3.5 | 560 | 0.5 | 7 |
EKO160/4.0 | 4 | 640 | 0.5 | 8 |
EKO160/5.0 | 5 | 800 | 0.5 | 10 |
EKO160/6.0 | 6 | 960 | 0.5 | 12 |
EKO160/7.0 | 7 | 1120 | 0.5 | 14 |
EKO160/8.0 | 8 | 1280 | 0.5 | 16 |
EKO160/10.0 | 10 | 1600 | 0.5 | 20 |
Multiple mats can be used for
larger areas
For more information, please give us a call on 01394 539 109 or email us at mail@ekoheat.co.uk