EKO200 Heating Mat
200 W/m2 Designed for CONSERVATORIES & OTHER
HIGH HEAT LOSS AREAS
EKO200 mats are ready to install heating elements consisting of a thin heating cable securely attached to a glass fibre mesh. The system is designed for indoor use to provide a warm floor effect or primary heat source. It should be installed directly under the surface to be heated, in either flexible tile adhesive or self levelling compound.
| Type of Heating Cable | Double-core of Dia. 3.4mm, conductor screen |
| Number of Cold Tails | 1
|
| Power output | 200W/m² |
| Power supply | 230V~50/60Hz |
| Mat thickness | 3.5mm |
| Minimum installation temperature | 0ºC |
| Maximum operating temperature | +80ºC |
| Power output of heating cable | ~14W/m |
| Insulation | FEP/XLPE |
| Outer Sheath: | XLPE |
| Resistance tolerance | ±5% |
| Minimum radius of bending cable | 5 D |
200 W/m2 Underfloor heating mat
| Part Number | Area (m2) | Power (w) | Width (m) | Length (m) |
| EKO200/2.0 | 2 | 400 | 0.5 | 4 |
| EKO200/4.0 | 4 | 800 | 0.5 | 8 |
| EKO200/5.0 | 5 | 1000 | 0.5 | 10 |
| EKO200/6.0 | 6 | 1200 | 0.5 | 12 |
| EKO200/8.0 | 8 | 1600 | 0.5 | 16 |
Multiple mats can be used for
larger areas
For more information, please give us a call on 01394 593 109 or email us at mail@ekoheat.co.uk
